20 in stock
Ivanco Best Deal
100W Solar Street Light – 10,000LM | 24Hr Runtime | IP66 | Radar+Motion
100W Solar Street Light – 10,000LM | 24Hr Runtime | IP66 | Radar+Motion
Couldn't load pickup availability

About the product
Runs 24 Hours. Radar Detection. Zero Electricity Cost.
What's in the box
1× Solar Street Light · 1× Remote Control · 1× Mounting Bracket · Expansion Screws ×4 · Clamps · Long External Hex Screws ×4 · Wrench · User Manual
Specs at a glance
Model: TW001
Power: 100W
Brightness: 10,000 lumens
Color temperature: 6500K daylight white
LED chips: 288 × SMD5054
Battery: 6V 10Ah
Charge time: 3–6 hours
Runtime: Up to 24 hours
Lifespan: 50,000 hours (~11+ years at 12hrs/day)
IP rating: IP66
Control: Radar + Light sensor + Timer + Remote
Installation: Wall / pole / tree trunk mount (no wiring)
Dimensions: 43 × 32 × 8 cm · Weight: 2.16 kg
What makes it stand out
- Runs up to 24 hours per charge — 6V 10Ah battery stores enough power to run all night and then some. Charges fully in 3 to 6 hours of sun. In motion/radar mode it lasts even longer since full brightness only kicks in when movement is detected.
-
4-in-1 control system — Radar + Light + Timer + Remote
— Radar detection: Detects movement through rain, fog, and obstacles where standard PIR sensors lose accuracy. Dims to 30% standby, jumps to 100% on detection.
— Light sensor: Turns on automatically at dusk, off at sunrise every night.
— Timer: Set full brightness for 2, 3, 5, 6, or 8 hours after dusk.
— Remote control: Switch modes and adjust settings from the ground. - 10,000 lumens — 100W efficiency — 10,000LM from 100W means 100 lumens per watt. Bright, efficient, and covers a wide area clearly at night without wasting stored solar energy.
- 288 SMD5054 LED chips — high-efficiency chip type with low light decay. Stays bright over years of use without significant dimming. Rated for 50,000 hours — over 11 years running 12 hours a night.
- 6500K bright white light — crisp daylight-white that makes people, vehicles, and objects clearly visible. Not the dim yellow of older outdoor lights.
- IP66 waterproof — fully dustproof and protected against powerful water jets from any direction. Rain, snow, storms — stays working year-round.
- Mounts anywhere — walls, poles, tree trunks — flexible installation with included mounting bracket, clamps, screws, wrench, and expansion hardware. No wiring, no electrician.
Who uses the TW001
Homeowners — driveways, front gates, back yards, and garden paths that stay bright all night without any electricity cost.
Sports & recreation facility owners — basketball courts, outdoor courts, and recreational areas that need reliable bright lighting after dark.
Commercial property managers — parking lots, building perimeters, streets, and squares with zero-maintenance, zero-cost lighting.
Farm & rural property owners — solar powered means no power lines needed in remote locations.
Common Questions
How does it run for up to 24 hours?
The 6V 10Ah built-in battery stores enough energy during charging to run the light for 15 to 24 hours depending on which mode you use and how much sun the panel received that day. In radar/motion mode it lasts even longer because full 100% brightness only activates when movement is detected — the 30% standby level uses far less battery. After a full 3 to 6 hour charge in good sun, most users get reliable all-night performance with plenty of reserve.
What is radar detection and why is it better than a regular motion sensor?
Standard motion sensors (PIR) detect body heat — they work well in clear conditions but can lose accuracy in rain, fog, extreme cold, or when movement is partially blocked by obstacles. Radar detection uses microwave signals that pass through rain, fog, and thin obstacles, giving more reliable and consistent detection in all weather conditions. If you're in an area with frequent rain or foggy evenings, radar detection is a meaningful upgrade over a basic PIR sensor.
What are the 4 control methods?
Radar detection dims to 30% standby and activates to 100% when movement is detected within range — best for driveways, yards, and security areas. Light sensor turns the light on automatically at dusk and off at sunrise every night with no manual input needed. Timer mode runs at full brightness for a set duration (2, 3, 5, 6, or 8 hours) after dusk then switches off — best for areas where you only need part-night coverage. Remote control lets you switch modes and adjust settings from the ground without climbing up to the fixture.
What does IP66 mean?
IP66 means it's completely dustproof and protected against powerful water jets from any direction. Heavy rain, storms, and high winds with rain — it keeps running without any issues. Built for permanent outdoor installation in all weather year-round.
Can I mount it on a tree or pole?
Yes — the included hardware covers wall mounting, pole mounting, and tree trunk mounting. The kit includes expansion screws, clamps, long hex screws, a wrench, and a mounting bracket. Most installs take 15 to 20 minutes with basic tools.
Is it good for a basketball court?
Yes — 10,000 lumens of wide-area coverage makes it well-suited for outdoor basketball courts, recreational areas, and sports spaces. The 6500K daylight-white light is easy on players' eyes and makes the court clearly visible after dark. For a full-size court, two units positioned at either end gives the most even coverage.
How long do the LED chips last?
The SMD5054 LED chips are rated for 50,000 hours — that's over 11 years running 12 hours a night. They also have low light decay, meaning the brightness stays consistent over years of use rather than dimming significantly over time as cheaper LED types do. No bulb replacements, no maintenance schedule.
What's the coverage area?
The TW001 covers a wide ground area below the fixture at 10,000 lumens. For best results, mount it at a height of 4 to 6 meters (13 to 20 feet) on a wall, pole, or trunk. At that height the wide beam covers a large driveway, parking bay, or outdoor court area effectively.
What's in the box?
The TW001 solar street light, a remote control, a mounting bracket, expansion screws (×4), clamps, long external hex screws (×4), a wrench, and a user manual. Everything needed for installation across walls, poles, and tree trunks is included.